Wireless door sensor protect any unwanted entry from door or window. When configured with D3D Security system, if any motion is detected by PIR sensor, Security system will activate the siren and send alert on all registered user mobile phones.
PIR motion sensor detect the motion in protected area using the passive infra-red rays. When configured with D3D Security system, if any motion is detected by PIR sensor, security system will activate the siren and send alert on all registered user mobile phones.
D3D Wireless Gas Leakage Detector is an INPUT DEVICE designed for natural gas, LPG leakage detection. It can use independently or as a front-end detector of an alarm system. Upon detection of natural gas and LPG, the GL-100A automatically generates an alarm signal to D3D control panel and sound & flash alarm. The unit is RF and EMI Immunity to interferences produced by radio device.
D3D Wireless Flash Siren 100DB can be configured with D3D security system. The SIREN sounds a high pitched warbling tone, similar to a police car. Its purpose is to deter the intruder and draw attention to the premises. When D3D security system is triggered by any sensor, the system activate this loud siren to alert the family members and neighbours.
D3D Wireless outdoor Strobe Siren is a loud audible device with 120DB sound & rechargeable battery. The unit is weatherproof & mounted on the exterior of the premises. In case of any intrusion, D3D security system activate this siren to alert neighbours & deter the thieves.
Smart Wireless Battery powered Outdoor Siren External IP55 High powered (Two Piezos with 120dB in 1 Meter) Output with a bright red pulsing strobe light that will sound when an alarm condition is detected. It has a very simple setup procedure and comes with long life Batteries. It uses the latest 433 MHz wireless transmission frequency to reach up to 100 meters range (Line of sight).
D3D vibration sensor is the perimeter protection for the wall, glass or and other building part that can be broken by thieves or burglars. The vibration sensor is usually installed on doors, windows and walls.
D3D vibration sensor operates on the principle that when window or walls is vibrated by the intruder shock or dig, it will trigger a signal to alarm system & D3D security alarm will be activated. D3D vibration sensor is popular and widely used because they detect an intruder before he enters the protected premises.
D3D Necklace Type Waterproof Panic Button (Pedant Button) is a very useful device for asking Emergency Help while unexpected incidents happened.When configured with D3D security alarm system, pressing this button will activate the D3D security system.
D3D wireless pet immune sensor adopts Pet Immunity technology and specialized optical lens to eliminate false alarm. D3D PIR-100D Wireless Outdoor Dual PIR Motion detector powered up by solar panel, no need to connect power wires at all, total wireless connection.(PIR Motion Sensor)
The D3D wireless scroll steel door sensors are normally installed on the steel doors of shop or garage and is a perimeter protection for your premises. With compete wireless design, you do not need to add any extra wiring. The magnetic contact is usually installed in exterior opening doors or windows that are reachable from the ground (or from another part of a building which is accessible from the ground – such as a garage).
D3D Wireless Signal Repeater is connected between D3D control unit and sensors to increase the applicable range between control unit and sensor. This is a device that amplifies a signal before transmitting it again. It is special used to increasing the wireless signal transmits range when the sensors are installed at longer distance from D3D control unit than the acceptable range. This is also helpful to increase the range when there are lots of thick walls between sensor and control unit.
The wireless Ceiling PIR Motion detector is an INPUT DEVICE, The CPIR-100B PIR motion detector is designed to provide detection of criminal intrusion through door frames and window frames into a protected area by sensing infrared energy (heat) emitting from an intruder’s body moving through a protected area.
D3D wireless Smoke Sensor is an INPUT DEVICE used for fire detection which is triggered by smoke. It can use independently or as a front-end detector of an alarm system. When configured with D3D Security system, if any smoke is detected by fire sensor, security system will activate the siren and send alert on all registered user mobile phones.